How to clean Brother TN-350 toner from carpet
When installing your Brother TN-350 toner and it falls or when sometimes accidentally the packaging opens the toner cartridge and it leaks on your carpet. How do you clean it up? We have discussed how to clean ink from your carpet but it is fundamental to know how to clean toner. These steps can be use to clean Brother toner as well as any kind of toner stains.
Materials you can use to clean (It is not necessary to use all in fact the less the better):
- Vacuum Cleaner
- Towels
- Isopropyl Rubbing Alcohol: Do not dilute & pour directly into the carpet.
- Dry Cleaning Solvent: Do not dilute & pour directly into the carpet.
- Citrus Solvent: Do not dilute & pour directly into the carpet.
- Warm Water Club Soda Detergent: Mix 1 teaspoon of liquid dish detergent with 2 cups of warm water -- not hot water. The dish detergent should be clear in color without bleaching properties.
- Hydrogen Peroxide: Mix 1 tablespoon of hydrogen peroxide with 3 tablespoons of warm water -- not hot water. The hydrogen peroxide should contain 3% H2O2 and is available at your local grocery store or drug store. WARNING: This product has a bleaching affect and is best used on very light colors.
Cleaning Steps:
1. Use a normal dry vacuum to clean up any leftover debris.
2. Use any of the products above – as previously mentioned try to use the least as possible and never mix procedures if you use one and it didn’t work, clean it off as much as possible before using another.
. Agitate (tamp, rub gently, or distribute solution evenly), and then blot. Continue blotting until the stain no longer transfers to your cloth, or until the stain disappears.
4. If needed, reapply cleaning solution evenly, agitate, then blot again until the stain no longer transfers to your cloth or the stain disappears.
5. Rinse with warm water or flush with a personal extractor (such as a carpet cleaning machine with water-only rinse setting).
6. Dry the spot with a hair dryer or fan.
Important Notes:
· Work from the outside of the stain to the center. · Never scrub the carpet. A back and forth motion can distort the carpet tufts very quickly. Attempt to remove all the stain by blotting. If you need to rub the carpet, gently brush or stroke the carpet pile in one direction about 10 times and then brush the opposite direction 10 times. Alternate the direction a few times. The less brushing the better. · Make the application of water and cleaning agents with a clean spray bottle if possible. A great alternative is to apply the cleaning solutions to a clean white towel, and blot with the towel. Do not pour cleaning agents directly on the stain. Do not soak the carpet when using cleaning agents. If solvent cleaning agents get to the carpet backing, they may cause delamination (i.e., the separation of the primary and secondary backing). · Repeat steps that are the most effective at removing the stain. It is not necessary to exercise every step. In fact, the less steps, the better. You should always end with the rinsing step. · Neutralizing or counterbalancing chemicals can create offense odors and irritating fumes. Avoid breathing such fumes if they occur. · Never use bleach or similar products to remove stains. (There are rare exceptions to this guideline.) Read the instructions carefully for any product you decide to use.
source
Posted by Karla Arostegui - Content Mgr. at 5/7/2009 7:19 AM 
Categories: Brother Printer Ink
Tags: toner cartridge OEM toner Brother cleaning
Categories: Brother Printer Ink
Tags: toner cartridge OEM toner Brother cleaning
Thats really very nice blog, I am impressed.
Reply to this
Great ....You have beautifully presented your thought in this blog post.
Reply to this
i found a video that has this submit info almost sentence exactly. is it your video?
Reply to this
It's good article. as we are in a very advanced generation so we should use new technology and application for each and every thing.
Reply to this